This is a bypass/converter fuel pressure regulator for carburetted engines, both aspirated and turbo.

You can fit any kind of pump, both low pressure and high pressure for injection . At output you always have a very stable pressure to carburetter/s, with high flow. With turbo applications on carburetters, sending the boost to 5 mm connector on the lid fuel pressure rises with 1:1 rate.

This is a genuine Malpassi regulator and is manufactured with a special alloy casting, each piece is assembled by hand and tested to assure maximum performance

• For applications on aspirated a/o turbocharged carburetted engines
• Compatible with alcoholed fuel (E85)
• Composite special diaphragm
• 1 x INLET port,1/8" NPT
• 1 x OUTLETport,1/8" NPT
• 1 x RETURN port,1/8" NPT
• 1 x boost connector, 5 mm tail (only for turbo applications)
  
• Pressure setting range from 1.5psi to about 5psi (plus boost if turbocharged)
  
• Supplied with 3 x1/8" NPT connectors (8 mm tail)

WARNING: This product falls under